ATEX Wi-Fi Antenna
The ATEX Wi-Fi Antenna is an explosion proof antenna and includes an ATEX zone 2 certification. The antenna provides a stable Wi-Fi connection in hazardous areas.
Check the top-left corner of the product image for certifications. For the latest details, refer to the datasheet or contact us. Generally, these certifications apply to the following regions:
| Certification | Geography |
|---|---|
| NEC/CEC (Class/Division) | USA, Canada |
| NEC/CEC (Class/Zone) | USA, Canada |
| ATEX | Mandatory in EU, EEA, Turkey and United Kingdom. Accepted in most countries not listed elsewhere in this table. |
| INMETRO | Brazil (based on IECEx) |
| IECEx | Mandatory in Australia and Israel. Accepted in most countries not listed elsewhere in this table. |
Check our comprehensive guide on explosion proof equipment certifications and where they're recognized.
Description
Key features and benefits
- ATEX zone 2 and 22 certified
- The Wi-Fi signal is able to go through steel and concrete
- Shipping is worldwide
- Subtle design, suited for outdoor and indoor applications
The ATEX Wi-Fi Antenna provides full Wi-Fi coverage in ATEX zones. The Antenna itself is designed for use in Zone 2 and 22, but if the product is combined with a special HF-barrier, it also allowed to be used Zone 0 and 20.
A coaxial cable is available to connect the ATEX antenna to a non-ATEX Wi-Fi access point. The cable has a maximum length of 25 metres. For longer distances or a coverage without a loss, we advise to use an intrinsically safe ATEX Wi-Fi access point.
Additional information
| ATEX Zone | 2 |
|---|---|
| Power Supply | PoE, 12/24 V DC |
| Frequency | Dual band, 2400-2500 / 5150-5850 MHz |
| Wire Line | Cat6/FTP via RJ45 or fibre optics |
| Antennas | 2 or 3 pre-assembled antennas |
| EU Directive | 2014/34/EU (ATEX 114) |
| Applied standards | EN 60079-0; Explosive atmospheres – Part 0: Equipment – General requirements |
Related products
-
ATEX Zone 0IECExClass I, Div I / IIMining Approved
-
ATEX Zone 2/22
-
ATEX Zone 2
